Installing The Power Supply - TYAN TOLEDO I3000R Manual

Onboard LAN LED Color Definition
The three onboard Ethernet ports have green and yellow LEDs to indicate LAN
status. The chart below illustrates the different LED states.
10/100/1000 Mbps LAN Link/Activity LED Scheme
10 Mbps
Active
100 Mbps
Active
1000 Mbps
Active
No Link

2.11 - Installing the Power Supply

There are two power connectors on your Toledo i3000R S5191. The Toledo i3000R
S5191 requires that you use an EPS12V power supply that has a 24-pin and an 8-
pin power connector. Please be aware that ATX 2.x, ATX12V and ATXGES power
supplies are not compatible with the motherboard and can damage.
EPS12V (24-pin )
Applying power to the board
1. Connect the EPS 12V 8-pin power connector.
2. Connect the EPS 12V 24-pin power connector.
3. Connect power cable to power supply and power outlet
YOU MUST unplug the power supply before plugging the power cables
NOTE
to motherboard connectors.
Left LED
Link
Blinking Green
Link
Blinking Green
Link
Blinking Green
EPS12V (8-pin)
http://www.tyan.com
Green
Green
Green
Off
31
Right LED
Off
Off
Green
Green
Orange
Orange
Off