TYAN TITAN TURBO PLUS ATX Manual page 27

Power Management Setup
From within this menu, you can set or disable system power manage-
ment options.
PnP/PCI Configuration
Enter this sub-menu to modify the configuration of Plug and Play
standard and PCI BUS parameters.
Load BIOS Defaults
This item will load the BIOS defaults, which are the most stable
settings for each system parameter.
Load Setup Defaults
This item will load the Setup defaults, which are the optimal values for
the system parameters.
Integrated Peripherals
This option lets you enable or disable onboard devices. You can also
configure the I/O and IRQ settings of the onboard serial and parallel
ports.
Supervisor Password and User Password
Change, set, or disable a password with this function. It allows you to
limit access to the system and/or to Setup.
IDE HDD Auto Detection
The IDE HDD Auto Detection menu automatically configures your
hard disk parameters.
Save & Exit Setup
Saves changes to CMOS and exits setup.
Exit Without Saving
Abandons all CMOS changes and exits setup.
27