Pioneer AVIC-Z110BT Operation Manual page 184

Appendix
Appendix
Symptom
No sounds are produced.
The volume level will not rise.
The icon 9 is displayed, and op-
eration is not possible.
The picture stops (pauses) and
the navigation system cannot be
operated.
The picture is stretched, with in-
correct aspect ratio.
A parental lock message is dis-
played and DVD playback is not
possible.
Parental lock for DVD playback
cannot be canceled.
Playback is not with the audio
language and subtitle language
settings selected in [DVD/
DivX® Setup].
The picture is extremely unclear/
distorted and dark during play-
back.
iPod cannot be operated.
184
En
Cause
Cables are not connected correctly.
The system is performing still, slow
motion, or frame-by-frame playback
with DVD-Video.
The system is paused or performing,
fast reverse or forward during the
disc playback.
The operation is not compatible
with the video configuration.
The reading of data is impossible
during disc playback.
The aspect setting is incorrect for
the display.
Parental lock is on.
The code number is incorrect.
The DVD playing does not feature
dialog or subtitles in the language
selected in [DVD/DivX® Setup].
The disc features a signal to prohibit
copying. (Some discs may have
this.)
The iPod is frozen.
An error has occurred.
Action (Reference)
Connect the cables correctly.
There is no sound during still, slow motion, or
frame-by-frame playback with DVD-Video.
For the media other than music CD (CD-DA),
there is no sound on fast reverse or forward.
This operation is not possible. (For example,
the DVD playing does not feature that angle,
audio system, subtitle language, etc.)
After touching g once, start playback once
more.
Select the appropriate setting for that image.
(Page 163, Page 130)
Turn parental lock off or change the level.
(Page 131)
Input the correct code number. (Page 131)
Switching to a selected language is not possi-
ble if the language selected in [DVD/DivX®
Setup] is not recorded on the disc. (Page 130)
Since the navigation system is compatible
with the copy guard analog copy protect sys-
tem, the picture may suffer from horizontal
stripes or other imperfections when a disc
with that kind of protection signal is viewed
on some displays. This does not mean the na-
vigation system is malfunctioning.
! Reconnect the iPod with the USB interface
cable for iPod.
! Update the iPod software version.
! Reconnect the iPod with the USB interface
cable for iPod.
! Park your vehicle in a safe place, and turn
off the engine. Turn the ignition key back to
"Acc off". Then start the engine again, and
turn the power to the navigation system back
on.
! Update the iPod software version.