Voice To Ensure Safe Driving; Basics Of Voice Operation - Pioneer AVIC-Z110BT Operation Manual

Chapter
33 Operating Your Navigation System with Voice
To Ensure Safe Driving
CAUTION
For your safety, avoid viewing the screen in the
voice operation as much as possible while
driving.
If you use voice operation, select [US English]
in [Voice Language] of "Language". If you se-
lect other languages, voice operation will not
be available.

Basics of Voice Operation

Your Pioneer navigation system uses the latest
in voice recognition technology. You can use
voice commands to operate many of its func-
tions. This chapter describes where you can
use voice commands, and also what com-
mands the system accepts.
p This function is not available while the cata-
loging of iPod is created.
Flow of voice operation
You can start voice operation any time even
when the map screen is displayed or AV is op-
erating. (Some operations are not available.)
The basic steps of voice operations are as
follows.
1 Switch the screen to map screen or AV
operation screen.
2 Press the VOICE button to activate
voice operations.
3 Speak a command into the microphone
after the beep.
4 When the command is recognized, the
navigation system displays next options on
the screen, and pronounces it in some case-
s.
5 Repeat previous step as necessary.
170
En
6 The requested operation will be carried
out.
p The voice operation may not be operable for a
minute after the navigation system has booted
up.
p Voice operation will be activated 30 seconds
after the map screen is displayed.
If the VOICE button does not respond, display
the disclaimer screen and then touch [OK].
The map screen is displayed.
Starting voice operation
% Press the VOICE button when the map
screen or the AV operation screen is dis-
played.
The voice operation screen appears.
1
:
You can listen to the brief operating in-
struction.
2
:
cancels voice operation.
You can cancel the voice operation feature
at any time by saying "Cancel". After you
cancel voice operations, the display returns
to the screen displayed before the voice op-
eration screen appeared.
How to use the voice operation
Searching for a location by address
In this example, you want to search for a loca-
tion by address and set it as your destination.
1 Press the MODE button to display the
map screen or the AV operation screen.
1
2