Using The Radio (Am); Storing And Recalling Broadcast Frequencies; Using The "Function" Menu; Storing The Strongest Broadcast Frequencies - Pioneer AVIC-Z110BT Operation Manual

Using the radio (AM)

Storing and recalling broadcast
frequencies
With a touch of any of the preset tuning keys
([P1] to [P6]), you can easily store up to six
broadcast frequencies for later recall (also
with the touch of a key).
Preset tuning keys
1 When you find a frequency that you
want to store in memory, touch and hold a
preset tuning key [P1] to [P6] until the pre-
set number (e.g., P. C 1) appears.
The selected radio station has been stored in
memory.
2 The next time you touch the same pre-
set tuning key [P1] to [P6], the radio station
frequencies are recalled from memory.
p You can also use [c] and [d] to recall radio
stations assigned to preset tuning keys [P1]
to [P6].

Using the "Function" menu

Touch [AM] on the "AV Source" menu
1
to display the "AM" screen.
= For details concerning operations, refer to
Screen switching overview on page 36.
2 Touch .
1 2
1 Storing the strongest broadcast fre-
quencies
= For details, refer to this page.

2 Tuning in strong signals

= For details, refer to this page.
Storing the strongest broadcast
frequencies
"BSM" (best stations memory) lets you auto-
matically store the six strongest broadcast fre-
quencies under the preset tuning keys [P1] to
[P6] and, once stored there, you can tune in to
these frequencies with the touch of a key.
% Touch [Start] to turn BSM on.
BSM begins to flash. While BSM is flashing,
the six strongest broadcast frequencies will be
stored under the preset tuning keys [P1] to
[P6] in order of their signal strength. When
this is complete, BSM stops flashing.
p To cancel the storage process, touch
[Stop].
p Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have already saved by using [P1] to [P6].
Tuning in strong signals
Local seek tuning allows you to tune in only
those radio stations with sufficiently strong
signals for good reception.
1 Touch [On] to turn local seek tuning on.
To turn local seek tuning off, touch [Off].
2 Touch [cPrev] or [Nextd] to set the sen-
sitivity.
There are two levels of sensitivity for AM.
Level: 1 — 2
p The level "2" setting allows reception of only
the strongest stations, while lower settings
let you receive weaker stations.
Chapter
15
109
En