Pioneer AVIC-Z110BT Operation Manual page 167

Customizing preferences
Touch [EQ] on the "AV Sound Settings"
1
menu.
= For details, refer to Displaying the "AV
Sound Settings" menu on page 165.
2 Touch the equalizer you want.
Adjusting the preset equalizer curve
effect
You can adjust the effect of the preset equali-
zer curves.
The following equalizer curves can be ad-
justed:
! Super Bass
! Powerful
! Natural
! Vocal
Touch [EQ] on the "AV Sound Settings"
1
menu.
= For details, refer to Displaying the "AV
Sound Settings" menu on page 165.
2 Touch the equalizer you want.
Touch [+] or [–] next to "Nuance".
3
p The level can be adjusted in the range of –6
to +6.
p If [Natural] is selected, the level can be ad-
justed in the range of –4 to +6.
Adjusting the equalizer curves
You can adjust the currently selected equalizer
curve setting as desired. Adjustments can be
made with a 7-band graphic equalizer.
The difference between "Custom1" and
"Custom2"
! A separate Custom1 curve can be created
for each source. If you make adjustments
when a curve Super Bass, Powerful,
Natural, Vocal, Flat, or Custom1 is se-
lected, the equalizer curve settings will be
memorized in Custom1.
! A Custom2 curve can be created common
to all sources. If you make adjustments
when Custom2 curve is selected, the Cus-
tom2 curve will be updated.
! The adjusted Custom1 curve is memorized
for each of the source selected, but one
curve is shared for the following sources.
— CD, ROM, DVD-V, DVD-VR, DivX
— AM and FM
— EXT1 and EXT2
— AV1 and AV2
— SD and USB
— XM and SIRIUS
! The different source volume level can be
set between iPod and USB.
! When [Flat] is selected, no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
[Flat] and a set equalizer curve.
Touch [EQ] on the "AV Sound Settings"
1
menu.
= For details, refer to Displaying the "AV
Sound Settings" menu on page 165.
2 Touch one of the keys to select a curve
that you want to use as the basis of custo-
mizing.
3 Touch [Customize].
4 Touch the frequency that you want to
adjust the level.
5 Touch [a] or [b] to adjust the level of
the equalizer band.
Each time you touch [a] or [b], the level of
the equalizer band increases or decreases.
Chapter
32
167
En