Map In Standard Mode - Panasonic CNGP50U - Car Strada Portable Mobile Navigation System Operating Instructions Manual

8.2

Map in Standard Mode

The map is always in Standard mode when you are not navigating,
when you have not calculated a route, and when no destination is being
searched for on the map.
The following characteristics are typical of this view:
Your current position is indicated by a triangle in red in the middle of the
lower third. If you move, the position of the triangle will not move on the
screen. Instead, the visible map section will scroll, corresponding to
your position.
The system selects the scale of the map depending on your current
speed.
Tap the
►
Destination Search mode.
Information: For more detailed information, please refer to chapter
"Map in Destination Search Mode" on page 31.
Functions of the Map in Standard Mode
When the map is open in Standard mode, tap any point on the map.
Buttons with various functions will be displayed.
2D/3D: Changes between 2D and 3D mode. The symbol for the mode that is
currently set is marked orange.
Day/Night: Changes the display mode between "day" and "night". The symbol
for the mode that is currently set is marked orange.
Working with the Map
(Destination Search) to open the map in
- 27 -