Working With The Map; Maps; Map In Standard Mode - Panasonic CN-GP50N Operating Instructions Manual

Traffic: Opens the T
listed.
For detailed information, please refer to chapter "TMC (Traffic
Information)", page 33.
8

Working with the Map

8.1

Maps

Even if you have stored several navigation maps on the SD Memory
Card in your navigation system, it can only operate with one map at a
time.
In the M
map is currently being used. You can also select another map here.
8.2

Map in Standard Mode

The map is always in Standard mode when you are not navigating,
when you have not calculated a route, and when no destination is being
searched for on the map.
The following characteristics are typical of this view:
Your current position is indicated by a triangle in red in the middle of the
lower third. If you move, the position of the triangle will not move on the
screen. Instead, the visible map section will scroll, corresponding to
your position.
The system selects the scale of the map depending on your current
speed.
Tap the
►
Destination Search mode.
- 26 -
I
RAFFIC NFORMATION
window, tap Settings > Current Map in order to see which
ENU
(Destination Search) to open the map in
window in which pending reports are
Working with the Map