Working With The Map; Maps - Panasonic CNGP50U - Car Strada Portable Mobile Navigation System Operating Instructions Manual

Route List: Shows detailed directions for the route, including all points at which
you must turn.
For detailed information, please refer to chapter "Route List" , page 34.
Route Profile: Opens the R
options for route planning and, if necessary, change them.
Save Destination: Saves the specified address or destination in the F
list.
For detailed information, please refer to chapter "Saving Destinations" ,
page 18.
Save Route: Opens a window in which you can save the planned route under a
specific name.
For detailed information, please refer to chapter "Saving Routes", page
22.
Settings: Opens the S
system.
For detailed information, please refer to chapter "Changing the
Navigation Settings" , page 37.
Show on Map: Shows the specified address on the map.
Simulation: Simulates a navigation based along the displayed route. This
simulation can be performed without GPS reception. Simulation is,
however, restricted to routes of max 100 km (60 mi).
Touch screen Calibration: Opens a window in which you can recalibrate the
touch screen (realign) should it react imprecisely to touch.
Traffic: Opens the T
listed.
For detailed information, please refer to chapter "TMC (Traffic
Information)", page 36.
8

Working with the Map

8.1

Maps

Even if you have stored several navigation maps on the SD Memory
Card in your navigation system, it can only operate with one map at a
time.
In the M
map is currently being used. You can also select another map here.
- 26 -
P
OUTE
window. Here you can configure the navigation
ETTINGS
I
RAFFIC NFORMATION
window, tap Settings > Current Map in order to see which
ENU
window. Here you can view the
ROFILE
window in which pending reports are
AVORITES
Working with the Map