8.3
Map in Preview Mode
You have entered a destination and tapped the Start Navigation button.
- OR -
You have planned or loaded a route and tapped the Show Route
button.
The map opens in Preview mode. The entire route is visible.
1
The route is highlighted in orange.
2
A triangle in red shows the current position.
If you display a planned or loaded route and the specified starting point
is not your current location, then the current position is possibly not
shown on the preview.
3
The destination is marked with a little flag.
If you display a planned or loaded route, the starting point and each
route point will be marked with a little flag.
4
You will see the total distance for the route in a small info box, together
with the estimated trip time and the estimated time of arrival.
Note: The data displayed depends on the settings you have configured
in the M
If you display a route with several stages, you will see this information
for each stage.
Tap the Route List button to view detailed directions for the route.
►
(see "Route List" on page 34)
Tap the Start Navigation button in order to begin the trip.
►
- 28 -
window under Settings > Basic Settings.
ENU
Working with the Map