Table of Contents
Advertisement
Product Code
UPC
ASR2500SAS2
00735858184014
FSR2500LXFAN
00735858184021
FSR2500BRPFAN
00735858184038
ASRLXFANS
00735858184045
ASR2500PS
00735858184052
ADRBEZBLACK
00735858165129
ADRLCDBEZEL
00735858165082
ADRTAPEKIT
00735858165075
ASR2500SATAPE
00735858184069
ASR2500SIXDRV
00735858184076
ASR2500EESPR
00735858184083
ASR2500CHSPR
00735858184090
MM
Description
881261
SR2500- SAS PCI Cable Kit - Supports cabling from an
add-in PCI card with SFF-8484 ganged connector in the
full-height slot to the passive Midplane only. This cable is
recommended for use with the Intel
SRCSAS18E (5 Pack).
880525
SR2500 LX hot-swap redundant fan spare kit - Contains 3
fans (1 x 60mm, 2 x 80mm).
Notes: Not compatible with BRP SKU fans. This SKU can
also be used to add second bank of fans to upgrade the
KDK SKU to achieve redundant cooling.
882057
SR2500 BRP Non-redundant fan spare kit - Contains two
fans, one of each type (1 x 60mm, 1 x 80mm) - Not
compatible with SR2500 LX SKU fans.
881263
BRP to LX Fan upgrade kit. This is a complete set of
redundant/hot-swap fans (six total) along with hot-swap fan
bracket and cabling. The upgrade requires removing the
BRP fans and fan brackets and replacing the entire
assembly. BRP and LX fans are not interchangeable.
881262
SR2500 750-W power supply module spare/upgrade. This
is required to provide redundant power (1+1).
857675
SR2400/SR2500 black bezel for use with standard control
panel (no LCP cutout).
857586
SR2400/SR2500 (2U) black bezel with cutout for Intel
Local Control Panel (LCD). Note: This requires Intel
Local Control Panel.
882437
SR2400/SR2500 SCSI tape mounting kit that contains
tape tray, drive power cable (which connects to backplane)
and terminated SCSI cable. Notes: This kit requires a third-
party SCSI PCI add-in card with SR2500.
Note: Either this option or the sixth SAS/SATA drive kit can
be installed (both cannot be supported simultaneously).
881260
SR2500 SAS/SATA tape drive mounting kit that contains
tape drive mounting tray, one SATA/SAS cable and one
power cable for tape drive (which connects to backplane).
Note: Either this option or the sixth SAS/SATA drive kit can
be installed (both cannot be supported simultaneously).
901833
SR2500 Sixth SAS / SATA drive kit that contains one 3.5–
inch drive carrier, backplane board insert, and cables (one
power and one SAS/SATA) to enable a sixth hot-swap
SAS or SATA drive.
Note: Either this option or a Tape drive kit can be installed
(both cannot be supported simultaneously).
881265
SR2500 Electrical spares kit that contains one each of the
following: Hot-swap backplane board, sixth drive
backplane board and cables, SAS midplane, passive
midplane, bridge board, front control panel board, optical
drive interposer board, PCI-X active riser, PCI-X passive
riser, PCI Express* FH riser, PCI Express* low-profile riser,
optical drive (IDE) cable, redundant fan cable bracket
assembly, USB floppy cable, serial cable, I
SATA/SAS cables, tape drive power cable, 80-mm BRP
fan, 80-mm LX fan, 60-mm BRP fan, 60-mm LX fan, LCP
interposer board.
880281
SR2500 Mechanical spares kit that contains spare PCI
bracket assembly, BRP fan mounting structure, LX fan
mounting structure, power supply air baffle, CPU duct
assembly, hard drive carrier, hard drive carrier blank (for
sixth drive/tape bay), sixth drive filler panel, metal fillers for
GCM and I/O module knockouts, optical drive tray, optical
drive bay filler panel, USB floppy adapter tray for optical
bay, HDD to USB floppy adapter tray, tape drive mounting
Qty
5
®
RAID controller
1
1
1
1
1
®
1
®
1
1
1
1
2
C cable,
1
16
Advertisement
Table of Contents
