TYAN TEMPEST I5000XL Manual page 20

JP20: FWH Write Protect Jumper
1
1
(Default)
JP23: LAN Enable/Disable Jumper
1
3
(Default)
1
3
JP24: PCI-X Frequency Setting Jumper
3
1
1
3
(Default)
3
1
JP25: PS/2 Wake Up Jumper
1
3
1
3
(Default)
JP26: Power for Hardware Monitor Jumper
1
1
Use this jumper to enable the FWH write protect.
Use this jumper to disable the FWH write protect.
(Default)
1-2 Close: enable LAN (Default)
2-3 Close: disable LAN
1-2 close: 100MHz
2 close: 133MHz (Default)
2-3 close: 66MHz
1-2 Close: Use this jumper to disable the PS/2 devices
from waking up.
2-3 Close: Use this jumper to enable the waking up of
the PS/2 devices. (Default)
Open: debug only
Close: normal operation
20
http://www.tyan.com