TYAN TEMPEST I5000XT Manual page 22

8. Repeat this procedure for the second processor.
Cooling Fan Installation
After you have installed the processor, the heatsink should be installed to ensure
that the processor runs efficiently and does not overheat. Use heatsink for best
results.
Follow these instructions to install the heatsink shown.
1. Apply some (a little will work, more doesn't equal better performance)
thermal compound to the top of the processor. Try and apply a thin, even
layer over the top of the processor.
2. Align the heatsink with the four holes around the processor socket.
3. Press the heatsink down until the four screws are securely seated in the
holes.
4. Use a screw driver to secure the four screws.
22