Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Siemens 6ES7136-6DC00-0CA0
Summarization of Contents
ET 200SP System Documentation Guide
Information Classes for ET 200SP
Details the three areas of documentation for the ET 200SP system and how to access them.
Basic System Information
Covers the System Manual, STEP 7 online help, and general system information.
Module Device Information
Describes module-specific details found in equipment manuals.
Essential Tools for System Operation
Introduces essential tools like TIA Selection Tool and SIMATIC Automation Tool.
Product Overview and Properties
Module Properties and Technical Characteristics
Details the technical characteristics and features of the F-DQ 8x24VDC/0.5A PP HF module.
Optional Accessories
Lists optional accessories that must be ordered separately for the module.
Fail-Safe Output Passivation Procedures
Explains procedures to prevent unintentional activation of fail-safe outputs and passivation.
System Connecting and Wiring
Wiring Diagram and Block Representation
Provides the block diagram and terminal assignment for wiring the F-DQ module.
Module Parameters and Address Space
Configurable Module Parameters
Lists and describes the configurable parameters for the F-DQ module.
Detailed Parameter Explanations
Provides detailed explanations for various parameters like F-parameters and channel parameters.
F-CPU Address Assignment
Details the address assignment for user data and value status in the F-CPU.
F-I/O Module Application Examples
Ground Line Installation for Fail-Safe Performance
Covers correct ground line installation for achieving fail-safe performance.
Wiring Loads to Digital Outputs
Illustrates wiring a load to each digital output for SIL3/Cat.4/PLe achievement.
Two-Channel Actuator Connection
Explains connecting two-channel actuators using two digital outputs for safety applications.
Fail-Safe Digital Input to Output Connection
Details connecting fail-safe digital inputs to digital outputs for safety.
Interrupts and Diagnostic Message Handling
LED Status and Error Display
Explains the LED display (DIAG, Channel, PWR) for status and error indication.
Module and Channel Interrupts
Lists module-wide and channel-wide diagnostic interrupts supported by the F-module.
Diagnostics Alarms and Solutions
Details diagnostics alarms, their fault codes, meanings, and possible solutions.
Input/Output Value Status Information
Describes the value status providing information on input/output signal validity.
Technical Specifications of the Module
F-DQ 8x24VDC/0.5A PP HF Specifications
Provides detailed technical specifications including electrical, hardware, and environmental data.
Achievable Safety Classes and Performance
Outlines the safety performance levels like PLe and SIL achievable with the module.
Operating Ambient Conditions
Specifies the ambient temperature requirements for operation.
System Response Time Analysis
Fail-Safe Output Reaction Time Definition
Defines reaction time as the interval between safety message and output signal change.
Reaction Time Calculation Factors
Lists times like Tcycle and TDAT used in reaction time calculations.
Load Switching Characteristics
Connecting Capacitive Loads
Provides a diagram and guidance on connecting capacitive loads to avoid short-circuit detection.
Switching Inductive Loads
Shows maximum permitted inductive loads based on load current and switching frequency.
Need help?
Do you have a question about the 6ES7136-6DC00-0CA0 and is the answer not in the manual?
Questions and answers