PROEL BPLL Manual page 31

Balanced connection with EUROBLOC terminal
Connessione Sbilanciata su morsetto EUROBLOC
RCA connection
• Connect antenna, connect adaptor AC/DC to PLLUD and to the main
power supply socket
• Switch on the receiver
• Insert in the transmitter the batteries and switch on.
• There are 2 modes for operating frequency setting
C. Select manually The SAME frequency on the receiver and on the
transmitter (revert to paragraph 3 and 4)
D. Set manually the frequency on the transmitter (see paragraph 4) and
proceed with automatic scan on the receiver ( revert to paragraph 3)
Nota: In case of many wireless microphone systems operating
contemporaneously, the automatic frequency receiver scan can set
the receiver frequency accordingly to another transmitter operating
frequency. Continue then the scan to ensure the combination
selected: receiver of the system 1 coupled with the transmitter of the
system 1 , receiver of system 2 coupled with transmitter of system 2
etc.. .