PROEL BPLL Manual page 29

Select level using key UP and DO, confirm pressing with MEM key.
If the signal in input is below the setting level, the receiver is MUTE,
Such function eliminates background noise during pause time. Ensure to
set such level to avoid to eliminate the signal .
5. TRANSMITTER (BPLL/MPLL):
Press for one second to switch on the Transmitter. Transmitter displays
the current frequency, the battery charge level. Press newly to pass in a
cyclic mode to the following functions: CHANNEL - GROUP - PL - LOCK
/ UNLOCK. To disable the transmitter press and keep pressing for one
second.
• Frequency selection
Enter CHANNEL mode pressing key CH/ON, CH symbol is displayed
along with the current channel value. Using SELECT key
CHANNEL. Using key CH/ON GROUP mode is activated, the symbol
GP is displayed with the current group value. Use
GROUP selection. Some seconds after the last key press, the display
returns to the initial visualisation. .
• RF level Selection
Enter POWER mode pressing 3 times key CH/ON, Symbol PL and the
current power value are displayed. Use SELECT key for level selection.
Some seconds after the last key press, the display returns to the initial
visualisation.
• Lock Function
Enter Look/unlock mode pressing 4 times CH/ON key, Symbol look or
unlock ( considering the setting selected) are displayed , Using SELECT
key to select the setting (look/unlock). Some seconds after the last key
press, the display return the initial visualisation. When the transmitter is
blocked, it is possible to effect the functions scan. The display visualise
the current setting without allowing the setting modification: the sole
available functions setting is : to power on, to switch off, to set MUTE and
lock selection.
to select
SELECT key for