Kyocera KM-F1060 Operating Instructions Manual page 56

• Device Gamma
Adjust the gamma of print images (color intensities).
• Pixel Diameter
Adjust the darkness of the print image. Move the slider to specify the pixel size. You can choose
between specifying the real size in inches or specifying it as a percentage relative to the printer
resolution.
• Luminance (CIE Y)
Adjust the luminosity of the print image.
3. Auto Configuration
When your machine is connected onto the network (TCP/IP), click this button to set the Options
Configuration automatically.
4. Number of Paper Trays
Select the number of available paper trays if optional Paper Feed Module(s) are installed.
5. Edit URL...
Edit the URL address that will be displayed when clicking the
Tab (see page 69).
NOTE
56
button
button
1. Device Options Tab specifies device-specific settings and settings of optional devices.
Make sure that the Device Option Tab is set properly before printing a document, or printing
problems may occur.
Support Contacts (W)...
URL Title
Enter an applicable URL title.
URL
Enter the URL address to be associated to the
Support Contacts (W)...
(See page 69)
Contact
Enter applicable contact information
(i.e.: The email address of the contact person)
button of the Paper
button of the Paper Tab.