Connecting Players - Marantz PM-11S3 Owner's Manual

Connecting players

Set phono equalizer switch button by the type of your cartridge to be used MM or MC.
Turntable
NOTE
• Connecting a ground wire may
produce noise. In this case, do not
make the ground connection.
AUDIO
GND
OUT
L
R
Connect the ground
wire from your
turntable here.
3
2
L
R
CD player
AUDIO
AUDIO OUT
L
L
R R
Super Audio CD player
3 3
2 1 2 1
3
1 2 1
L
R
L
R
n BALANCED Jacks
The BALANCED jacks on this unit are equipped with XLR connectors that are widely used on
professional equipment. Their features are listed below.
• The 3 pin construction enables the musical signal to be transmitted as a balanced signal, with
little effect from external noise
• The detachable locking mechanism minimizes connector play and enhances connection
reliability.
The XLR connector for professional use is internally wired in either of the following two
systems.
• USA system (w PIN=COLD e PIN=HOT)
Tuner
• European system (w PIN=HOT e PIN=COLD)
AUDIO
AUDIO OUT
L
L
R
R
BD player
AUDIO
If a product that employs the European system is connected with this unit via a balanced cable,
AUDIO OUT
the reproduced signal may be phase-inverted.
L
L
To correct the inversion, connect the one side XLR connector reversing the w PIN and e PIN.
R
R
ENGLISH
9