Related Manuals for Konica Minolta SD-510
Summarization of Contents
Introduction to Finishing Adjustment
FS-532 and FS-541 Overview
Overview of the FS-532 and FS-541 machines, detailing their functions and available sub-options.
Types of Adjustment Functions
Details on various adjustment functions, covering paper alignment, staple position, booklet folding, and punching.
Staple Adjustment
Staple Adjustment Items
Introduction to the standard staple function and its four related adjustments.
Misalignment of Stapled Bundle
Adjustments for horizontal and vertical misalignment of stapled bundles, affecting alignment plate spacing.
Staple Position and Pitch
Adjustments for staple position (front/rear) and the spacing (pitch) of 2-position staples.
Fold and Fold & Staple Adjustment
Fold and Fold & Staple Adjustment Items
Overview of adjustments for Half Fold, Fold & Staple, and Tri-Fold functions.
Fold Positions for Half-Fold and Fold & Staple
Adjustments for fold position in Half Fold and Fold & Staple modes.
Booklet Staple Position and Pitch
Adjustments for staple position and pitch in Fold & Staple mode for booklets.
Booklet Page Alignment and Half-Fold Strength
Adjustments for booklet page misalignment and half-fold booklet strength.
Tri-Fold Position Adjustments
Adjustments for the 1st (inside) and 2nd (outside) fold positions in Tri-Fold mode.
Other Adjustments
Punch Hole Adjustment Items
Introduction to punch hole adjustments available with the Punch Kit [PK-525].
Punch Hole Position Adjustments
Adjustments for punch hole positions in horizontal, vertical, and skew directions.
Main Tray Output Adjustments
Adjustments for paper alignment and gripper operation for main tray output.
Need help?
Do you have a question about the SD-510 and is the answer not in the manual?
Questions and answers