Table of Contents
Advertisement
USER GUIDE
www.visioneng.us
Mantis PIXO stereo microscope with
dynamic perspective optics, a choice of
up to 3 fixed magnification objectives and
built in camera to capture, review and
share digital images.
Mantis ERGO stereo microscope
with dynamic perspective optics
and a choice of up to 3 fixed
magnification objectives.
Mantis IOTA compact
stereo microscope with
dynamic perspective
optics.
Advertisement
Table of Contents
Related Manuals for Vision Engineering MANTIS IOTA
Summarization of Contents
General Information and Safety
System Safety Precautions
Read Health & Safety section, ensure authorized personnel operate and maintain the system.
Servicing and Repairs
Repairs must be performed by Vision Engineering-trained personnel using original spare parts.
Cleaning Procedures
Disconnect power before cleaning; use mild detergent for external surfaces and specialist cloth for optics.
Understanding Symbols
Explains warning symbols indicating potential hazards to personnel or equipment malfunction.
Health and Safety
Electrical Safety Guidelines
Disconnect power before maintenance, avoid liquids, use only provided power supply, check electrical input specifications.
Illumination Safety
Avoid direct eye exposure to illumination; use UV eye protection and cover skin when using UV.
Environmental Considerations
Maintain appropriate temperature, humidity, and avoid vibrations; ensure adequate ventilation for components.
Operator Wellbeing and Ergonomics
Operator Wellbeing and Ergonomics
Optimize workspace and task activity for ergonomic performance and user comfort.
Compliance Statements
Confirms product compliance with EC Directives (WEEE, RoHS) and UKCA/CE marks.
Unpacking PIXO and ERGO
Mantis Head and Accessories
Unpack the Mantis head, power supply, objective lenses, and glare hood.
PIXO Connectivity and Software
Unpack the USB cable and software USB stick for PIXO models.
Controls for PIXO and ERGO
Ergonomic and Lighting Controls
Adjust IPD, use dimmer controls, and operate the on/off switch for optimal viewing.
Mounting and Connectivity Features
Identify mounting points, ports, and interfaces for system setup.
Dimmer Controls for PIXO and ERGO
Joint Lighting Mode
Controls both LED arrays simultaneously for uniform lighting.
Individual LED Control
Allows independent dimming of left and right LED arrays.
White-UV Lighting Option
How to toggle between White and UV LEDs using dimmer controls.
Fitting Lenses on PIXO and ERGO
Procedure for Fitting Lenses
Step-by-step guide to inserting and securing lenses into the turret.
Fitting SLWD Lenses and Deflectors
Instructions for fitting Super Long Working Distance lenses and illumination deflectors.
Turret Operation for PIXO and ERGO
Switching Between Lens Positions
How to rotate the turret to select different objective lenses.
Parfocal Objective Note
Information regarding the parfocal nature of objectives (excluding SLWD).
Camera Operation for PIXO
Connecting PIXO Camera to PC
Instructions for connecting the PIXO camera to a PC via USB-C cable.
USB Cable Requirements
Requirement for a USB3.0 or better cable for optimal camera performance.
Unpacking the IOTA
Unpacking the IOTA Head
Identify and unpack the Mantis IOTA head unit.
Unpacking IOTA Power Supply
Identify and unpack the power supply for the IOTA system.
Unpacking IOTA Objective Lenses
Identify and unpack the objective lenses for the IOTA system.
Controls for IOTA
IOTA Ergonomic and Lighting Controls
Adjust IPD, operate the combined dimmer/on-off switch for lighting.
IOTA Mounting and Interface Points
Identify mounting points and the 12V power input port.
Fitting Lenses on IOTA
IOTA Protector Cap Handling
Instructions for removing and retaining the protector cap on the IOTA unit.
Procedure for Fitting IOTA Lenses
Step-by-step guide to inserting and locking IOTA lenses into place.
Procedure for Removing IOTA Lenses
Step-by-step guide to unlocking and removing IOTA lenses.
Unpacking the Verso Arm
Verso Arm and Mounting Components
Unpack the VERSO Arm, Base Mount, and Bench Clamp.
Verso Arm Accessories and Options
Unpack fixing screws, dust cover, washers, and the optional forearm pack.
Assembly of the Verso Arm
VERSO Base Mount Options
Details on mounting the VERSO arm using a Bench Clamp or Direct Mount.
Mounting the VERSO Arm
Instructions for securely mounting the VERSO arm to a work surface.
Optional Forearm Setup
Steps to attach and secure the optional forearm to the VERSO arm.
Adjustments for the Verso Arm
Adjusting Verso Arm Counterbalance
How to adjust the arm's counterbalance for different head weights.
Counterbalance Adjustment Procedure
Detailed steps for using the thumbwheel adjuster to set counterbalance.
Counterbalance Adjustment Safety
Important safety warning to ensure the system is supported during adjustments.
Using the Friction Brake
Using the Friction Brake
How to use the friction brake handle to apply friction or lock vertical movement.
Cable Tidies Management
Information on detaching and routing cables using the arm's cable tidies.
Verso Arm Movement Restrictor
Verso Arm Movement Restrictor
How to fit and use the movement restrictor for specific lenses.
Fitting the Movement Restrictor
Step-by-step guide to attaching the movement restrictor clip.
Movement Restrictor Safety Warnings
Safety notes regarding head positioning and potential finger traps.
Unpacking the Stabila Stand
Stabila Stand Components
Unpack the STABILA Column, Base, and associated mounting hardware.
Stabila Stand Accessories and Cables
Unpack cable tidy clip, tools, dust cover, and power interface cable.
Assembly of the Stabila Stand
Attaching Column to Base
Step-by-step guide to attaching the STABILA column to the base.
Connecting Power Interface
Instructions for connecting the power interface for different STABILA stand configurations.
Attaching Cable Retaining Clip
How to fit the optional cable retaining clip for cable management.
Interfaces of the Stabila Stand
Stabila Stand Mounting and Focus
Identify mounting points and the focus adjustment mechanism.
Stabila Stand Connectivity and Lighting
Locate power interfaces, cable clip, and substage dimmer control.
Adjustments for the Stabila Stand
STABILA Focus Adjustment Knobs
Details on the focus adjustment knobs for fine-tuning focus.
Adjusting Focus Mechanism Friction
How to adjust the friction in the focus mechanism for optimal operation.
Mounting the Mantis Head
Mantis Head Mounting Point Cover
Locating and removing the mounting point cover on the head.
Mantis Head Mounting Pin
Identifying the mounting pin on the stand.
Securing Mantis Head to Stand
Steps to secure the Mantis head to the stand using washers and screws.
Mantis Head Mounting Procedure
Step-by-step instructions for mounting any Mantis head to a compatible stand.
User Comfort with Mantis
Adjusting Mantis Head Eye Spacing
How to adjust the IPD knob for comfortable stereo viewing.
Ergonomic Viewing Setup
Tips for arranging workspace and adjusting system height for ergonomic posture.
Reducing Glare and Reflections
Tips for positioning the system and using the glare hood accessory.
Assembly of the Pilot Stage
Preparing Stand and Fitting Pillars
Remove object plate and fit stage pillars to the stand.
Mounting Pilot Stage and Glass
Align and secure the Pilot Stage, then place stage glass.
Operation of the Pilot Stage
Releasing the Pilot Stage Brake
How to release the brake mechanism using the handles.
Moving and Braking the Pilot Stage
Moving the stage and applying the brake to hold its position.
Pilot Stage Brake Mechanism Note
Information on the function of the brake mechanism for holding stage position.
General Care and Maintenance
Caring for Your Mantis System
Guidelines for cleaning, dust protection, and keeping accessories clean.
Service and Routine Maintenance
Policy on authorized service and procedures for desiccant/LED replacement.
Troubleshooting Common Issues
Troubleshooting Power and Image Problems
Resolve no power, blurred images, and single-eye view issues.
Troubleshooting Lighting and Reflections
Address lighting issues, reflections, and find additional support.
Technical Specifications: Heads
Head Optical and Illumination Specs
Details on optical performance, illumination, and physical size of heads.
PIXO Camera and Stand Specifications
Specifications for PIXO camera, and overview of stand compatibility.
Technical Specifications: Stands
STABILA Stand Dimensions
Detailed dimensions for the STABILA stand configurations.
STABILA Stand with Pilot Stage Dimensions
Dimensions for the STABILA stand when used with a pilot stage.
VERSO Arm Dimensions
Detailed dimensions for the VERSO Arm.
VERSO Arm with Forearm Dimensions
Dimensions for the VERSO Arm when fitted with the forearm.
System Options: PIXO
PIXO Heads, Lenses, and Stands
List of available head, lens, and stand options for PIXO models.
PIXO Software, Accessories, and Parts
Available software, accessories, and replacement parts for PIXO.
System Options: ERGO
ERGO Heads, Lenses, and Stands
List of available head, lens, and stand options for ERGO models.
ERGO Accessories and Replacement Parts
Available accessories and replacement parts for ERGO.
System Options: IOTA
IOTA Heads, Lenses, and Stands
List of available head, lens, and stand options for IOTA models.
IOTA Accessories and Replacement Parts
Available accessories and replacement parts for IOTA.
How-To Videos
How-To Videos: Unpacking
Videos demonstrating the unpacking procedures for PIXO, ERGO, and IOTA.
How-To Videos: Assembly & Operation
Videos covering assembly and basic operation of Mantis systems.
Need help?
Do you have a question about the MANTIS IOTA and is the answer not in the manual?
Questions and answers