Related Manuals for Nibe BA-ST 9030-1FE
Summarization of Contents
1. General Information
1.1 Introduction
Provides an overview and thanks the user for choosing the NIBE product.
1.2 Intended Use
Specifies the designed purpose of the hot water storage tanks with one coil.
3. Installation Guide
3.1 Storage Tank Location
Details the recommended placement and environmental considerations for the storage tank.
3.2 Housing and Insulation Disassembly
Outlines the steps for removing the tank's housing and thermal insulation.
3.3 Installation Requirements
Lists crucial technical requirements and safety standards for installation.
4. Connection and Start-up Procedures
4.1 Connecting the Tank
Explains how to connect the storage tank to water and heating systems.
4.2 Initial Start-Up
Describes the process of filling, venting, and checking the system before operation.
4.3 Thermal Insulation
Emphasizes the importance of insulating all system components to minimize heat loss.
4.4 Practical Recommendations
Offers advice for proper operation, including warnings and maintenance tips.
5. Maintenance and Care
5.1 Magnesium Anode Inspection
Details the procedure for checking the protective magnesium anode's condition annually.
5.2 Anode Wear Measurement
Explains how to measure the protective anode's wear using electrical current.
5.3 Anode Replacement
Provides instructions for replacing the protective magnesium anode every 18 months.
5.4 Storage Tank Cleaning
Outlines the recommended procedure for cleaning the storage tank from scale deposits.
9. Technical Data
9.1 Product Dimensions
Presents the physical dimensions and measurements of the storage tanks.
Need help?
Do you have a question about the BA-ST 9030-1FE and is the answer not in the manual?
Questions and answers