Porsche 928 - WORKSHOP MANUAL 1977 Workshop Manual page 309

928
Modifications to the steering wheel height adjuster
As of MY '92, axial locking of the operating level (No. 4) was improved by a spring clip (No. 1)
This has entailed modification of the operating lever (No. 4) and of the eccentric (No. 6).
The spring clip (No. 1) and two spring washers (No. 2) were newly introduced.
In case of repairs, the modified design should also be adopted for vehicles prior to MY '92
equipped with airbag.
Required parts: New lever, new eccentric, two spring washers and one spring clip.
Parts identification
No. Designation
4
Adjuster lever
dimension x =
6 Eccentric
Total length
Dimension x =
Original version 1 Modified version
without hole at end
106 mm
36.0 + 1.0 mm
14.5 + 0.2 mm
with hole at end (arrow)
111 mm
34.5 in 1.0 mm
13.0 + 0.2 mm
t
~*~~:~~::..
..,,.,,, -::.. ::::::;::::;::
2::;:: .:,.::.
~ a*Gg& i?g&j wx
;_
I I
?
48 - 40
Dismantling and assembling instructions
l
Printed in Germany - XXVII, 1991