Related Manuals for Redarc R-12-3000RS3
Summarization of Contents
RS3 Pure Sine Wave Inverter Overview
Product Functionality and Benefits
Details the safe, efficient, and reliable 230 VAC power output for electronic devices in remote environments.
Safety Warnings and Precautions
Safety Message Conventions and Hazard Levels
Explains signal words (WARNING, CAUTION, NOTICE) and their hazard levels for safety messages.
General Electrical Safety and Shock Prevention
Covers risks of electric shock, disassembly, exposure to elements, and proper grounding.
Handling and Battery Safety Precautions
Addresses risks from arcs/sparks, dropping tools, personal metal items, and battery acid contact.
Installation and Operational Notices
Includes notices on unit inspection, ventilation, polarity, feedback power, and frequency matching.
Front Panel Interface and Controls
Front Panel Component Identification
Identifies main switch, status LED, function switch, RCBO, and AC input/output interfaces on the front panel.
Main Switch and Status LED Operation
Details the 3-stage main switch for ON/OFF/Remote and the meaning of the Status LED.
DIP Switch Settings and Configuration
Explains DIP switch settings for voltage, power saving, and other inverter configurations.
Output Power Performance Charts
Presents charts showing sustained output power vs. input voltage and derating based on ambient temperature.
AC Input and Output Connector Types
Describes the connectors for AC input (IEC C14/C20) and AC output (IEC C13/GPO).
Rear Panel Connections and Interfaces
Rear Panel Component Identification
Identifies communication, remote control, chassis ground, and DC input connectors on the rear panel.
Communication and Remote Interface Pinout
Details pin assignments for RS-232 communication via the RJ11 interface.
Remote Control Terminal and Wiring
Explains CN1 terminal for remote ON/OFF switches and fault indicators with wiring examples.
Chassis Ground Connection Importance
Emphasizes the critical importance of proper chassis grounding for electrical safety.
Installation Guide and Procedures
Cable and Fuse Sizing Recommendations
Specifies cable sizing and fuse requirements for 12V and 24V installations based on length.
DC Input Terminal and Lug Requirements
Specifies M8 (5/16") stud compatibility for DC input lugs and terminal protection.
Mounting Requirements and Ventilation
Outlines environmental, physical, and orientation requirements for inverter mounting and ventilation.
Safety Checks Before DC Connection
Lists critical safety checks before connecting DC input cables, including switch position and disconnections.
DC Input Cable Connection Steps
Step-by-step guide for connecting DC input cables to the inverter and battery.
Inverter Power-Up Procedure
Instructions for turning the inverter on and checking the Status LED for readiness.
AC Input and Output Connection Steps
Procedure for connecting AC input and output cords and setting the main switch.
Routine Maintenance and Cleaning
Covers basic maintenance, cleaning, and tightening of terminals.
Technical Specifications
Output Characteristics and Protection Systems
Lists output voltage, frequency, waveform, and protection features like over/under voltage.
Signal, Environmental, and Safety Standards
Details remote controls, indicators, operating conditions, and safety/EMC standards.
1200 W Model Specifications
Detailed input, standby, ATS, and output characteristics for 1200W models.
2000 W Model Specifications
Detailed input, standby, ATS, and output characteristics for 2000W models.
3000 W Model Specifications
Detailed input, standby, ATS, and output characteristics for 3000W models.
Physical Dimensions and Weight
Provides physical dimensions and weight for 1200W, 2000W, and 3000W inverter models.
Warranty and Support Information
Limited Warranty Terms and Contact Details
Provides information on full warranty terms and conditions and regional contact details.
Need help?
Do you have a question about the R-12-3000RS3 and is the answer not in the manual?
Questions and answers