Related Manuals for Redarc R-12-2000RS3
Summarization of Contents
Front Panel Overview
Main Switch and Status Indicators
Details the 3-stage Main Switch and Status LED for inverter operation and status.
Function Switch Configuration
Explains DIP switch settings for voltage selection and power-saving modes.
RCBO Safety Switch
Describes the RCBO safety switch function for overcurrent and residual current protection.
AC Input and Output Interfaces
Details the AC input and output connection sockets for connecting appliances.
Rear Panel Components
Communication and Remote Interface
Details the RJ11 interface for remote control and communication with other REDARC devices.
Remote Control Terminal
Explains the terminal for connecting an external ON/OFF switch and fault indicator.
Chassis Ground Connection
Describes the importance and procedure for establishing a proper chassis ground connection.
DC Input Terminals
Identifies the terminals on the rear panel for connecting the DC power input.
Installation Procedures
Cable and Fuse Sizing
Recommends appropriate cable and fuse sizes for 12V and 24V DC input connections.
Lug Requirements
Details the required lug types and sizes for making secure DC input terminal connections.
Mounting Guidelines
Guides on inverter mounting options, environmental requirements, and clearances.
Ventilation and Safety Precautions
Covers ventilation fan needs and critical safety precautions before DC input connections.
Chassis Grounding
Explains the importance and procedure for establishing a proper chassis ground connection.
DC Input Cable Connections
Step-by-step guide for connecting DC input cables to the inverter's positive and negative terminals.
Initial Operation and AC Connections
Instructions for turning the inverter on, connecting AC input/output, and basic maintenance.
Maintenance Procedures
Details on periodic cleaning, tightening terminals, and general inverter upkeep.
Technical Specifications
General Output and Protection Specs
Details output voltage, waveform, protection features, environmental operating conditions, and EMC standards.
1200 W Model Specifications
Provides detailed input, standby, ATS, and output performance specifications for 1200W models.
2000 W Model Specifications
Provides detailed input, standby, ATS, and output performance specifications for 2000W models.
3000 W Model Specifications
Provides detailed input, standby, ATS, and output performance specifications for 3000W models.
Physical Dimensions
Shows detailed physical dimensions and mounting hole specifications for all models.
Warranty and Support
Limited Warranty Terms
Outlines the limited warranty terms and conditions for REDARC products.
Contact and Support Information
Provides contact details for technical support and customer service in various regions.
Need help?
Do you have a question about the R-12-2000RS3 and is the answer not in the manual?
Questions and answers