BESAFE IZI SLEEP - V8.0 User Manual page 7

Fitting your child in the iZi Sleep
Position of the shoulder belt:
a
Check that the shoulder belt
slots (17) are level with your
child's shoulders.
b Adjusting the schoulder belts:
Open the storage compartment (19)
on the back of the iZi Sleep. Detach
the shoulder belt adjuster (18), and
place it in the correct position by
supporting the belt from the inside.
(see illustration above). Make sure
adjuster is clicked in.
c
Lay the shoulder belts (4) over the
sides of the iZi Sleep, before your
child is seated. Put the child in
the seat. Place the belts over the
shoulder and close the harness
buckle (5). Pull the central adjuster
(6). Just two fingers should fit
between child and shoulder belt.
Make sure the belts are not twisted.
When the child weighs over 13kg or the child's head grows
above the seat, the child should change to the iZi Comfort,
group 1 seat.
You must adjust the shoulder belt of the harness to the
!
correct position for your child before installing the seat.
The harness must be fastened and adjusted correctly at all
times. Children should be encouraged to remain within the
harness system.
Too high
19

Too low Correct
18