Advertisement
Quick Links
SHOWERMATE TP
Installation, Operation & Maintenance
Instructions
Please leave this instruction booklet with the owner as it contains
important warranty, maintenance and safety information
Read this manual carefully before commencing installation.
This manual covers the following products:
S1.5 bar Twin
Pt. No. 49084
S2.0 bar Twin
Pt. No. 49085
FOR SINGLE OUTLET POSITIVE HEAD APPLICATIONS ONLY
S2.0 bar Single
Pt. No. 49086
Advertisement
Related Manuals for Stuart Turner 49086
Summarization of Contents
Product Information
Product Description
Details the electric motor-driven centrifugal pump and its automatic control system.
Application
Outlines the intended use of the pumps for single shower pressure boosting.
Storage Guidelines
Instructions for storing the product before installation.
Safety and Pre-Installation
General Safety Warnings
Critical safety warnings and precautions for operation and installation.
Pre-Installation Checklist
Items to check before commencing pump installation.
Important Installation Facts
Essential information regarding water storage, temperature, flow, and pipework.
Water Storage Capacity
Ensuring adequate hot and cold water storage for pump demand.
Water Temperature Limits
Permissible temperature range for water entering the pump.
Minimum Flow Rate Requirement
The necessary gravity flow rate for pump operation.
Pipework General Guidelines
Best practices for pipework design and support to prevent issues.
Plumbing Installation Regulations
Compliance requirements for plumbing installations.
Location Requirements
General Location Considerations
Key factors for pump placement and environmental needs.
Preferred Pump Placement
Optimal siting relative to the hot water cylinder.
Non-Preferred Pump Placement
Alternative siting options and risk mitigation.
Cold Water Supply Requirements
Dedicated, air-free supply setup for the cold water feed.
Hot Water Cylinder Connection
Methods for connecting to the hot water cylinder or tank.
Pump Connections
Hose to Pump Connection
Connecting flexible hoses to the pump inlet and outlet ports.
Hose to Pipework Connection
Securing flexible hoses to pipework using push-in connectors.
Typical Low Level Installation
Options for 90° bends on connections for low-level installations.
Electrical Installation and Earthing
Electrical Regulations and Safety
Compliance with electrical regulations and safety device requirements.
Earthing and Pipework Bonding
Proper appliance earthing and supplementary pipework bonding.
Wiring and Fuse Specifications
Correct wiring colour codes and fuse rating for the pump.
Supply Cord Management
Guidelines for replacing or extending the pump's supply cord.
Commissioning and Support
Commissioning Procedure
Steps for flushing, priming, and starting the pump correctly.
Technical Support Contact
Contact information for technical assistance.
Maintenance and Care
Water Scale Prevention
Running the pump regularly to prevent scale build-up on seals.
Chemical Handling Precautions
Avoiding contact with aggressive cleaning agents and flushing systems.
Warranty Information
Product Warranty
Details the warranty period and terms for the pump.
Need help?
Do you have a question about the 49086 and is the answer not in the manual?
Questions and answers