Advertisement
Quick Links
SHOWERMATE TP
Installation, Operation & Maintenance
Instructions
Please leave this instruction booklet with the owner as it contains
important warranty, maintenance and safety information
Read this manual carefully before commencing installation.
This manual covers the following products:
S1.5 bar Twin
Pt. No. 49084
S2.0 bar Twin
Pt. No. 49085
FOR SINGLE OUTLET POSITIVE HEAD APPLICATIONS ONLY
S2.0 bar Single
Pt. No. 49086
Advertisement
Related Manuals for Stuart Turner 49085
Summarization of Contents
Product Overview
Application Details
Details the intended uses of Showermate TP pumps in domestic vented stored water systems.
Product Storage Guidelines
Guidance on storing the product before installation to prevent damage.
Safety Precautions
General Usage Warnings
Crucial safety advice regarding product usage, limitations, potential hazards, and child supervision.
Pre-Installation Checklist
Component Inspection
Verify all pump components are present and undamaged upon receipt before installation.
Important Pre-Installation Facts
Water Storage Capacity
Ensures sufficient water capacity for pump operation and simultaneous appliance use.
Water Temperature Limits
Specifies maximum and minimum allowable water temperatures for the pump.
Minimum Flow Requirement
Details the minimum gravity flow needed for correct pump operation.
Pipework Guidelines
Covers secure pipework, flux avoidance, design for air locks, and material compatibility.
Plumbing Installation Regulations
Highlights compliance with current water and building regulations for installation.
Pump Location and Installation Site
General Location Guidelines
Covers access, protection, ventilation, safety, water retention, pressure, temperature, pipework, and noise.
Preferred & Non-Preferred Siting
Details optimal placement relative to the hot water cylinder and solutions for challenging layouts.
Single Pump Installation Location
Specific siting requirements for single pump models, including cold water supply.
Twin Pump Installation Location
Specific siting requirements for twin pump models, including cold water supply.
Water Connections
Hot Water Cylinder/Tank Connection
Guidance on pipework size, supply type, and connection methods for hot water cylinders.
Expansion Pipe Connection
Details requirements for connecting via the expansion pipe, including base height.
Pump Connections
Connection Warnings
Advisories on pipe materials, flux, paint, and operating valves during connection.
Hose to Pump Fitting
Instructions for connecting flexible hoses to the pump inlet and outlet ports.
Hose to Pipework Connection
Step-by-step guide for connecting flexible hoses to various types of pipework using push-in fittings.
Low Level Installation Options
Details on using 90° bends for low-level installations and preferred connection fittings.
Electrical Installation and Earthing
Installation Regulations
Electrical installation must comply with national regulations and be done by a qualified person.
Electrical Safety Measures
Highlights RCD usage, power isolation, and safe cord routing to prevent hazards.
Earthing Requirements
Details how the appliance must be earthed via the supply cord and the terminal box.
Pipework Bonding
Explains supplementary earth bonding for metallic pipework broken by flexible hoses or plastic.
Connection Method
Specifies permanent connection to fixed wiring via a double pole switched fused spur, not boiler circuits.
Wiring Connection Unit
Provides colour coding for mains lead wires (earth, neutral, live) and connection terminal identification.
Fuse Specification
Specifies the required fuse size for the pump model.
Internal Wiring and Serviceability
States the product is not serviceable and the terminal box cover should not be removed.
Supply Cord Replacement/Extension
Details that damaged cords must be replaced by qualified personnel and extension cords must match specification.
Commissioning the Pump
System Flushing
Instructs to flush pipework before connecting the pump to remove contaminants.
Water Supply and Priming
Ensures adequate water supply and proper priming of the pump before starting to prevent seal damage.
Starting Procedure
Step-by-step guide on how to start the pump and verify correct operation.
Technical Support Contact
Provides contact information for Stuart Turner TechAssist for further support.
Maintenance and Care
Non-Serviceable Design
Highlights that the pump is non-serviceable and the terminal box cover should not be removed.
Water Scale Prevention
Recommends running the pump periodically to exercise parts and prevent scale sticking to seals.
Chemical Compatibility
Warns against contact with acid-based descalents and aggressive cleaning agents.
Technical Specifications
Water Temperature Notes
Provides notes on optimal stored water temperature and maximum permissible water temperature.
Noise Level Specification
States the maximum permissible sound pressure level for the pump.
Product Warranty Information
Warranty Coverage
Details the 1-year warranty period, repair terms, and exclusions for material or workmanship defects.
Claim Procedure
Outlines how to make a warranty claim, including contact details and required proof of purchase.
Need help?
Do you have a question about the 49085 and is the answer not in the manual?
Questions and answers