Advertisement
Quick Links
Advertisement
Related Manuals for IDEAL 6660
Summarization of Contents
Safety Precautions
General Safety Instructions
Read and observe all operating and safety instructions, ensuring they are always available.
Child Safety and Blade Handling
Prohibit children from operating the machine and avoid reaching under the blade.
Blade Safety During Transport and Storage
Never leave the blade unattended or transport it without proper protection.
Material Cutting Restrictions
Do not cut hard or splintering materials to prevent damage or injury.
Pre-Operation Safety Checks
Verify one-man operation and disconnect power before any service work.
Machine Safety Guards and Devices
Ensure all protective guards are mounted and operating; do not operate without safety devices.
Safety Systems and Cable Protection
Utilize two-hand control and beam guard; protect the mains cable from damage.
Power Connection Guidelines
Connect the power cord to a single phase socket and switch off when not in use.
Blade Coverage During Operation
The blade must always be covered by the pressing bar.
Installation
Stand Assembly and Machine Placement
Assemble the machine stand and lift the unit onto it with adequate personnel.
Tool Holder Utilization
Tools and cutting sticks can be stored in provided holders for easy access.
Optional Accessories and Power Connection
Attach optional side tables and connect the machine directly to a power socket.
Operation
Pre-Operation Safety Checks
Understand instructions and verify safety devices are functioning before operating.
Machine Start-up and Basic Controls
Power on, activate control system, and adjust LED brightness or display settings.
Cutting Preparation and Paper Positioning
Use the optical cutting line and position paper accurately on the backgauge.
Performing and Interrupting Cuts
Activate cuts using two-handed controls and release them to interrupt or stop.
Control Panel Overview and Functions
Identify operating elements, start the machine, and adjust changeable functions like brightness.
Advanced Cutting Methods
Cut to specified dimensions or according to visual markings on the paper.
Program Creation and Management
Enter new programs, define steps, and cancel existing programs.
Blade and Cutting Stick Replacement
Blade Replacement Overview and Safety
Address cutting quality issues and follow safety guidelines for blade replacement.
Blade Adjustment and Lowering Procedure
Adjust blade depth and lower the blade using actuators for maintenance.
Using the Blade Changing Tool
Fit and use the blade changing tool to safely remove and install the blade.
Cutting Stick Replacement and Testing
Replace the cutting stick and perform a test cut to ensure proper function.
Post-Replacement Cutting Test and Adjustment
Perform a paper cutting test and adjust blade depth if necessary.
Maintenance and Cleaning
Machine Greasing and Cleaning
Grease the backgauge and other parts regularly; clean the machine.
Periodic Inspections and Safety Tests
Recommend annual inspections and 5-year safety checks by qualified personnel.
Possible Malfunctions
Troubleshooting: Machine Not Functioning
Check power, main switch, and control system activation if the machine does not operate.
Troubleshooting: Machine Turns Off
Address overload, blockages, or blunt blades by resetting safety buttons.
Troubleshooting Cutting Issues
Resolve last sheet cutting problems or poor quality by adjusting the stick or changing the blade.
Troubleshooting Display and Light Beam
Restore display illumination and troubleshoot safety light beam obstructions or errors.
Troubleshooting Motor and Service Contact
Address motor issues and contact the service team for unresolved problems.
Recommended Accessories
Blades, Cutting Sticks, and Tools
Lists part numbers for essential accessories like blades, cutting sticks, and changing tools.
Optional Side Tables and Paper Blocks
Optional side tables and paper knock-up blocks are available to enhance workspace.
Technical Data
Technical Specifications and Safety Light Beam Data
Details machine specifications, power requirements, and safety light beam performance.
Certifications and Sound Level Information
Lists safety certifications, approvals, and the machine's sound level.
Declaration of Conformity and Standards
Confirms compliance with EC directives and applied harmonized standards.
Need help?
Do you have a question about the 6660 and is the answer not in the manual?
Questions and answers