Central-Station Monitoring - Gemini GEM-RP3DGTL Operating Manual

Your alarm specialist may have
programmed your system to be moni-
tored by a central station. The built-in
digital communicator can transmit
emergency signals and status reports
to the central station 24 hours a day.
Communicator Features
Abort Delay. Ask your installer
which of your zones have abort delay,
a delay that enables you to reset the
system before it communicates to the
central station.
Regular Burglary (Non-24-Hour)
Zone reports are aborted by dis-
arming within the delay period.
24-Hour Zones and zones pro-
grammed to report restores must
be restored first, then the panel
armed and disarmed, all within
the delay period.
Opening and/or Closing Report-
ing. Your system can notify the central
station every time it is disarmed or
GEM-RP3DGTL.pub
page 21
C E N T R A L S T A T I O N M O N I T O R I N G
armed. Any or all of up to 96 differ-
ent users can each be identified. If
your system reports on arming
(Closing Report), the central station
will acknowledge arming. This will
signal at the keypad as a "ringback"
beep. Note: If the ringback signal is
not heard, call for service.
Wednesday, August 18, 1999 14:03
21