Gemini GEM-RP3DGTL Operating Manual page 19

14
BYPASS FIRE/TBL SYS TBL
INTERIOR
15
INTERIOR BYPASS FIRE/TBL SYS TBL
16
INTERIOR BYPASS FIRE/TBL SYS TBL
GEM-RP3DGTL.pub
page 19
K E Y P A D F U N C T I O N S
14. Activate EZM Zone Find? For installer's use only. If accidentally enabled,
press the button to exit.
C
CHIME
15. Activate Telephone Test? (Telephone Test programmed?
Sends a communicator test to the central station. A communication failure will be
indicated at the keypad by a system trouble "3" display. Repeat the test to attempt
CHIME
to correct a communication failure, as any successful communication will clear
this display.
16. Delay Arming 1-4 Hours. (Not for UL-listed systems.) Allows automatic arming
to be delayed up to 4 hours, 15 minutes, as follows:
CHIME For a 1-hour, 15-minute delay, press [1], then the
For a 2-hour, 15-minute delay, press [2], then the
For a 3-hour, 15-minute delay, press [3], then the
For a 4-hour, 15-minute delay, press [4], then the
Fifteen minutes prior to arming, the siren will sound a 2-second warning and the
keypad will begin a 15-minute countdown with the sounder pulsing. During this
time, arming may be delayed an additional 1 to 4 hours (as above), or autoarming
may be cancelled by arming and disarming the panel.
YES NO.)
J
button.
J
button.
J
button.
J
button.
19
Wednesday, August 18, 1999 14:03