Winding The Bobbin Thread, Regulating The Winder Tension - Pfaff 1295 Instruction Manual

9

Winding the bobbin thread, regulating the winder tension

.03
3
Fig. 9 - 03
Place an empty bobbin 1 on winder spindle 1.
Thread up as shown in Fig. 9-03 and wind the thread a few ttimes clockwise around
bobbin 1.
Engage the bobbin winder by pressing spindle 2 and lever 3 simultaneously
The tension of the thread wound onto bobbin 1 is set on knurled screw 4.
The bobbin winder will stop when sufficient thread is wound onto bobbin 1.
If the thread is wound on unevenly:
Loosen nut 5.
Turn thread guide 6 as required.
Tighten nut 5 again.
4
-
1
2
The bobbin is wound during sewing.
+
5
Setting up
6
9 - 3