Control Cam (Preliminary Adjustment) - Pfaff 1295 Instruction Manual

Adjustment
11

Control cam (preliminary adjustment)

.05.02
11 - 21
Requirement
1. Control cam 1, must be centred with the cutout of bearing mounting 5.
2. With the needle bar at t.d.c., screws 2 must be visible from the front and aligined
parallel with the bedplate.
3
Fig. 11 - 19
Re-position control cam 1 (screws 2) and fixing collars 3 (screws 4) according to
Requirement.
2
4
4
3
1
5