Communication Lines Graph - IBM PERFORMANCE MANAGEMENT FOR POWER SYSTEMS - GRAPH REFERENCE DOCUMENT 10-2010 Reference

Graph reference document
Table of Contents

Advertisement

Communication Lines Graph

Communication Lines Graph.
The Communication Lines graph shows the average communication line utilization for the last
three months for each communication line that is varied on during the collection period. The line
utilization must be greater than one percent to be shown in the graph.
The Y-axis shows the name of each communication line that is in use. The X-axis shows the
average line utilization in percent.
The percentage of errors that occurred on the communication line is shown in red when viewing it
interactively. Temporary errors are shown as recorded by the communications I/O processor.
Note: If the percentage of errors increases greatly over time, check the condition of the line.
64
PM for Power Systems Graph Reference Document

Advertisement

Table of Contents
loading

This manual is also suitable for:

Performance management for power systems

Table of Contents