Peak Interactive Processor - With Trend Projections - IBM PERFORMANCE MANAGEMENT FOR POWER SYSTEMS - GRAPH REFERENCE DOCUMENT 10-2010 Reference

Graph reference document
Table of Contents

Advertisement

Peak Interactive Processor – with Trend Projections
Monthly Peak Interactive Processor Utilization and Trending Graph.
The Peak Interactive Processor with Trend Projections graph shows the average processor
utilization for interactive jobs (Jobtype = I) during the last thirteen months. It also shows the
corresponding CPW value used for the two busiest hours for the shift during the period.
The symbols used on this graph are explained as follows:
The forward slash (green) at the bottom shows the level of processor utilization that is
considered acceptable.
The crosshatch (yellow) in the middle shows the level of processor utilization that is
considered marginal.
The backward slash (red) at the top shows the level of processor utilization that is
considered critical.
The black diamond shows the average of the two busiest hours per day during the
month.
The red line shows the limit for interactive processing based on the interactive feature
card or the defined interactive capacity of a partition. Utilization above the red line can
result in degraded response times.
50
PM for Power Systems Graph Reference Document

Advertisement

Table of Contents
loading

This manual is also suitable for:

Performance management for power systems

Table of Contents