Table of Contents
Advertisement
Owners Manual
QuickShot™
Important Safety Instructions
Read all warnings and instructions in this manual, on the unit, and in the battery and
charger manual before using the equipment. Be familiar with the controls and the
proper usage of the equipment. Save these instructions.
Important Medical Information
Read the medical alert card provided with the gun. It contains injection injury
treatment information for a doctor. Keep it with you when operating the equipment.
For portable spray applications of architectural paints and coatings only.
Not approved for use in explosive atmospheres or hazardous (classified) locations.
For professional use only.
3A9301C
EN
Additional Manual
Languages
Advertisement
Table of Contents
Related Manuals for Graco QuickShot 20B475
Summarization of Contents
Important Safety Instructions
Important Medical Information
Information regarding injection injury treatment for doctors.
Models
Related Manuals
Lists related manuals like the DeWALT charger manual.
Warnings
Fire and Explosion Hazard
Hazards related to flammable fumes and ignition sources.
Oil-based or Flammable Materials
Risks of static electricity with flammable materials.
Skin Injection Hazard
Risks of high-pressure fluid injection and serious injury.
Equipment Misuse Hazard
Dangers from improper operation and handling of the equipment.
Pressurized Aluminum Parts Hazard
Risks of chemical reactions with incompatible fluids in pressurized aluminum parts.
Battery and Charger Compatibility Hazard
Importance of using specified DEWALT batteries and chargers.
Toxic Fluid or Fumes Hazard
Dangers of toxic fluids and fumes to health.
Personal Protective Equipment
Recommendations for PPE to prevent injury.
Know Your Controls
Prime Knob
Directs fluid to cup or spray tip; used for priming and system pressure relief.
Spray Tip
Key to airless spray technology; can be reversed to clear clogs.
Trigger
Controls the operation of the sprayer.
Trigger Lock
Prevents the spray gun from spraying when engaged.
Flow Control
Allows adjustment of spray speed or system pressure.
Grounding Instructions
Pails
Instructions for grounding metal pails used with flammable fluids.
Setup
Pressure Relief Procedure
Procedure to relieve system pressure before cleaning or servicing.
Sprayer Setup
Steps for preparing the sprayer for use, including filter verification.
Belt Setup
Instructions for attaching and using the belt holster for hands-free operation.
Spraying
Flow Control
Adjusts pressure for precise spraying and reduces overspray.
Tip and Pressure Selection
Guide to selecting the correct spray tip and pressure for different coatings.
Spray Tip Orientation
How to adjust the spray tip guard for spraying direction.
Spray Techniques
Basic techniques for practicing spraying on scrap material.
Triggering Timing
Proper timing for pulling and releasing the trigger during spraying.
Spray Pattern Quality
How to achieve an evenly distributed spray pattern and identify issues.
Aiming Spray Gun
Technique for aiming the spray gun for overlapping strokes.
Clear Tip Clogs
Steps to clear a clogged spray tip to resume spraying.
Spray Tip Installation
Procedure for installing the spray tip and guard.
Cup Refills
How to refill the paint cup while the sprayer is on the belt or removed.
Pause in Spraying
Steps to take when pausing spraying to prevent clogs.
Cleanup
Cleaning Sprayer
Instructions for cleaning the sprayer after use.
Reference
Cleaning Fluid Compatibility
Guidance on flushing the system with different fluid types.
Recycling and Disposal
End of Product Life
Instructions for dismantling and recycling the product responsibly.
California Proposition 65
Warning regarding cancer and reproductive harm for California residents.
Troubleshooting
Sprayer Diagnostics
Table of diagnostic lights and their meanings for troubleshooting.
Spray Pattern Diagnostics
Identifies common spray pattern issues and their solutions.
Replacement Parts
Parts List
List of replacement parts with order numbers and descriptions.
Need help?
Do you have a question about the QuickShot 20B475 and is the answer not in the manual?
Questions and answers