Related Manuals for New Holland AutoCommand T7.290
Summarization of Contents
General Information Overview
Metric and Imperial Units
Lists metric and imperial units with their names and symbols for various applications.
Glossary of Terms
Defines acronyms and technical terms used throughout the operator's manual.
Operator Guidance and Manual Information
To the Owner
Provides essential information for tractor owners regarding operation and maintenance.
About This Manual
Explains the purpose, scope, and usage guidelines for the operator's manual.
Operational Procedures
Starting the Unit
Details the steps and procedures for starting the tractor's engine and systems.
Stopping the Unit
Outlines the correct procedures for safely shutting down the tractor's engine.
Moving the Unit
Covers safe operation and specific considerations when moving the tractor.
Transmission Operation
Transmission Controls
Explains the function and operation of various transmission control levers and mechanisms.
Manual and Automatic Modes
Details the operation of manual and automatic transmission modes for optimal performance.
Power Take-Off (PTO) Operations
Rear Power Take-Off (PTO)
Covers operating precautions and procedures for the rear PTO system.
Front Power Take-Off (PTO)
Details operating procedures and controls for the front PTO system.
Hitch Systems
Rear Hitch Operation
Describes the operation, settings, and adjustments for the rear three-point hitch system.
Front Hitch Management
Explains settings, operation, and management of the front hitch system.
Hydraulic Systems
Electro-Hydraulic Remote Control Valves
Details operation, settings, and adjustments for remote control hydraulic valves.
Hydraulic Power Beyond Port
Explains the power beyond circuit and ISO power beyond couplings.
Braking and Steering Systems
Trailer Braking Systems
Covers different types of trailer brake systems and their operation.
Wheel Track Adjustment
Details procedures for adjusting wheel tracks and front wheel alignment.
Maintenance Schedule and Procedures
Maintenance Chart
Provides a scheduled overview of maintenance tasks based on operating hours.
Every 10 Hours or Each Day
Lists daily checks and tasks to be performed every 10 operating hours.
Every 50 Hours
Details maintenance tasks to be completed every 50 operating hours.
Every 600 Hours
Outlines major service tasks required every 600 operating hours.
Troubleshooting and Specifications
Fault Code Resolution
Guides users through identifying and resolving fault codes displayed by the tractor.
Tractor Specifications
Lists key technical specifications for the tractor, including dimensions and capacities.
Need help?
Do you have a question about the AutoCommand T7.290 and is the answer not in the manual?
Questions and answers