Chapter 2: Hardware Installation; Installing Central Processing Unit (Cpu) - Biostar P4M890-M7 SE Manual

CHAPTER 2: HARDWARE INSTALLATION

2.1 I
NST ALLING
Special Notice:
Remove Pin Cap before installation, and make good preservation
for future use. When the CPU is removed, cover the Pin Cap on the
empty socket to ensure pin legs won't be damaged.
Pin Cap
Step 1:
Pull the socket locking lever out from the socket and then raise
the lever up to a 90-degree angle.
C P
ENT RAL ROCESSING
P4M890-M7 SE
U (CPU)
NIT
7