Desa CDCFNRA Owner's Operation And Installation Manual page 13

INSTALLATION
Continued
12. Install gas line. See Connecting To Gas Sup-
ply, page 16.
13. Check for leaks. See Checking Gas Connec-
tions, page 17.
14. Place mantel around fireplace. Be careful not
to damage wall or mantel.
15. Place perimeter trim kit on the shoulder screws
located on the side and top of the fireplace.
Firmly snap trim over shoulder screws on
fireplace (see Figure 12).
16. Adjust assembly to remove any gaps. Attach
remaining two 3" wood screws from hardware
pack through openings inside of fireplace sides
into the mantel. The openings are located at top
behind the area for top louver (see Figure 12).
17. Reinstall top louver.
Assembled
Hole for 3" Wood Screw
Brass Trim
for Attaching Fireplace to
Wooden Base
Figure 12 - Attaching Brass Trim to
Fireplace
116658-01A www.desatech.com 13