INSTALLATION
Continued
3. Install left and right brick liners using brackets
and screws from hardware kit as shown in Fig-
ure 34. Screw the bracket into top of firebox
and against brick liners. Adjust bracket before
tightening screw.
4. Remove log packaging material and discard.
Gently place log over burner (see Figure 35).
(Do not allow log to contact flame as this will
create sooting.)
5. Insert each rod through ten rings located at
top of screen (see Figure 36).
6. Insert first rod into hole in left side of firebox.
Fasten rod to rear hole near center of firebox us-
ing black Phillips head screw (see Figure 36).
7. Insert other rod into hole on right side of fire-
box and fasten rod to front hole near center of
firebox using remaining sheet metal screw.
Figure 33 - Installing Rear Brick Liner
Brick Liner
Bracket and
Screw
Left Brick
Liner
Figure 34 - Installing Side Brick Liners
116658-01A
www.desatech.com
Figure 35 - Installing Log
21