Desa CDCFNRA Owner's Operation And Installation Manual page 12

INSTALLATION
Continued
Mantel Clearances for Built-In
Installation
If placing mantel above built-in fireplace, you must
meet minimum clearance between mantel shelf and
top of fireplace opening (see Figure 10).
NOTICE: Surface temperatures
of adjacent walls and mantels be-
come hot during operation. Walls
and mantels above the firebox
may become hot to the touch.
If installed properly, these tem-
peratures meet the requirement
of the national product standard.
Follow all minimum clearances
shown in this manual.
NOTICE: If your installation does
not meet the minimum clear-
ances shown, you must do one
of the following:
• raise the mantel to an accept-
able height
• remove the mantel
10"
Note:
8"
A ll vertical
measurements
6"
are from top of
1
2
fireplace
opening to
bottom of
mantel shelf. All
measurements
are in inches.
Figure 10 - Minimum Mantel Clearances
for Built-In Installation
12
Mantel Shelf
/ "
2
Side of Firebox
www.desatech.com
Top
Louver
Figure 11 - Removing Top Louver and
Opening Bottom Louver
116658-01A