Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Valor 473
Summarization of Contents
Installation Conditions
Wall Requirements and Clearances
Details wall thickness, combustible material clearance, and projection requirements.
Regulatory Compliance
Outlines UK and Irish installation regulations and standards for safety.
Terminal Guard Fitting
Specifies requirements and recommendations for fitting a terminal guard.
Ventilation Requirements
Clarifies that no special room ventilation is required for the appliance.
Prepare the Wall
Wall Drilling Procedures
Guides on measuring, cutting holes, and fixing points for wall installation.
Combustible Wall Installation
Details procedures for installing on combustible walls, including cladding removal and protective plates.
Servicing
To Remove Outer Case
Steps for detaching and removing the appliance's outer casing.
To Remove Window Unit
Procedure for removing the fire's window unit.
To Remove Ceramic Fuel Items
Instructions for safely removing coals and coal bed.
To Remove Burner(s)
Steps for accessing and removing the main and decorative burners.
To Remove Injector(s)
Details on how to remove the burner injectors and their carriers.
To Remove Thermocouple
Steps for disconnecting and removing the thermocouple.
To Remove Electrode Pin
Procedure for removing the electrode pin and its securing nut.
To Remove Pilot Pipe & Jet
Instructions for detaching and removing the pilot pipe and jet assembly.
To Remove The Gas Tap And Piezo Unit
Steps for removing the gas tap and associated piezo unit.
To Remove The Piezo Generator
Specific procedure for removing the piezo generator from the tap.
To Grease The Control Tap
Instructions for cleaning and greasing the gas control tap's plug and spindle.
Need help?
Do you have a question about the 473 and is the answer not in the manual?
Questions and answers