Error Handling; Creating Dynamic Disks And Volumes - ACRONIS TRUE IMAGE ECHO - WORKSTATION User Manual

The preset is disabled.
When enabled, files and folders are restored directly to the folder that you specified as a
target folder. When disabled, the full path to the files and folders that exists in the backup
will be reproduced within the target folder.
5. Change SID after restoration is finished
The preset is disabled.
Acronis True Image Echo Workstation can generate a unique security identifier (SID) for
the restored system. You do not need a new SID when restoring a system on the same
computer where the image was taken from or when creating a full duplicate that will
replace the original system. Generate a new SID if the original and the restored systems
will work concurrently in the same workgroup or domain.
6. Restart the machine automatically
The preset is disabled.
Sometimes one or more reboots may be required during the restoration process. With this
option enabled, the program will not ask you for permission to reboot now or later, but
immediately reboots the machine.
7. Use FTP in active mode
The preset is disabled.
Previous versions of the software required usage of passive mode for the target FTP
server and usage of TCP and UDP ports 20 and 21 on the source computer. The current
version has no such limitations: you can use either active or passive mode.
Check this option if the FTP server where the target backup is stored uses active mode
and specify the port number in the FTP port number field.
It is recommended that you change the source computer firewall settings to disable the
Routing and Remote Access Windows service.

7.4.8 Error handling

1. Do not show messages and dialogs while processing ("silent" mode)
The preset is disabled.
With the silent mode enabled, the program will not display interactive windows. Instead,
it will automatically handle situations requiring user intervention. No prompts will be
displayed, including those for inserting removable media or the next tape. If an operation
cannot continue without user action, it will fail. Details of the operation, including errors,
if any, could be found in the operation log.
2. If an error occurs, re-attempt in (minutes)
The preset is enabled.
When the backup location on the network is not available or not reachable, the program
will attempt to reach the location at the specified time interval.

7.5 Creating dynamic disks and volumes

Acronis True Image Echo Workstation must obtain exclusive access to the disks to
perform operations with disks and volumes. This means no other applications can access
it at that time. Please close all other applications that use the disks (such as Windows
96 Copyright © Acronis, Inc., 2000-2009