Additional Settings - ACRONIS TRUE IMAGE ECHO - WORKSTATION User Manual

3. Find out the computer MAC address (Local Area Connection -> Status -> Support ->
Details -> Physical Address.)
4. Repeat steps 1-3 for all computers you wish to wake on LAN.
To enable the Wake On LAN option on the Acronis Group Server:
1. Find the computer to be backed up in the list of computers.
2. Select the computer and enter its MAC address in the Acronis Group Server (sidebar ->
Computer details -> MAC address: Set -> type the hex MAC address as XXXXXXXXXXXX
or XX-XX-XX-XX-XX -> click OK). The program will test the MAC address for validity and
display the test result.
3. Repeat steps 1-2 for all computers you wish to wake on LAN.
4. Schedule a group backup task for the above computers. When setting the backup
options, ensure that the Wake On LAN option is enabled. Any computer that is asleep as
the task starts will be powered on for running the task.

6.3.14 Additional settings

1. Validate backup archive upon operation completion
The preset is disabled.
The program will check integrity of the just created or supplemented archive immediately
after backup when enabled.
To check archive data integrity, you must have all incremental and differential backups
belonging to the archive and the initial full backup. If any of successive backups is
missing, validation is not possible.
2. Overwrite data on a tape without user confirmation
The preset is enabled.
When pulling a tape from the Imported media pool, Acronis True Image Echo Workstation
will warn that you are about to lose data on the tape. To disable this warning, check the
middle box.
3. Ask for first media while creating backup archives on removable media
The preset is enabled.
You can choose whether to display the Insert First Media prompt when backing up to
removable media. With the default setting, backing up to removable media may be not
possible if the user is away, because the program will wait for someone to press OK in
the prompt box. Therefore, you should disable the prompt when scheduling a backup to
removable media. Then, if the removable media is available (for example, CD-R/RW
inserted), the task can run unattended.
4. Reset archive bit
The preset is disabled. The option relates only to file-level backup.
In Windows operating systems, each file has an attribute File is ready for archiving,
available at selecting file -> Properties -> General -> Advanced -> Archive and
Index attributes. This attribute, also known as archive bit, is set by the operating
system each time the file is changed and can be reset by backup applications each time
they include the file in a backup copy. Archive bit value is used by various applications
such as databases.
79 Copyright © Acronis, Inc., 2000-2009