Managing Archives - ACRONIS TRUE IMAGE ECHO - WORKSTATION User Manual

To edit limitations for a backup location, select the backup location, click Quotas and
Time Limits and enter the new values in the appearing window.
To move a backup location along with all archives existing on it, select the backup
location and click Move to. The Move Backup Location Wizard will display all users
and computers associated with the selected backup location so you could make sure your
choice is right. Then select the new location for the archives.
As moving files can take a lot of time and system resources, it is recommended that you
schedule this operation for the time when the backup server computing load will be
minimal. You can do it in the Start Parameters window. To complete configuring the
operation, click Finish in the final summary window.
To move a backup location within the same device, you must have at least as much free
space on the device as all the archives in the backup location occupy, because the
archives will first be copied to the new place, and then deleted from the old place.
To delete all archives stored in a backup location, select the location and click Clear.
To delete a backup location, select the location and click Delete. This will delete all
archives stored in this location and redirect the associated computer/user's backups to the
default backup location.
The default backup location cannot be deleted. If you try to do so, the program will clean
the default backup location and issue an appropriate message. To delete the location
completely, first reassign the default backup location by selecting Specify Default
Settings -> Set backup location.
Cleaning and deleting backup locations might be time-consuming operations, so you can
schedule them for the off-peak period.

4.5.6 Managing Archives

To display a full list of backups, stored on the backup server, click Manage Backup
Archives.
57 Copyright © Acronis, Inc., 2000-2009