Cloning Summary; Cloning With Manual Partitioning; Old And New Disk Partition Layouts - ACRONIS TRUE IMAGE ECHO - WORKSTATION User Manual

Table of Contents

Along with the hard disk number, you will also see disk capacity, label, partition and file

system information. Different partition types, including primary, logical and unallocated

space are marked with different colors.

If you selected manual partition creation earlier, the partition layout will look different.

This partitioning method is described below.

14.3.11 Cloning summary

In the next window, you will see a list of briefly described operations to be performed on

the disks.

Cloning a disk containing the currently active operating system will require a reboot. In

that case, after clicking Proceed you will be asked to confirm the reboot. Canceling the

reboot will cancel the entire procedure.

Cloning a non-system disk or a disk containing an operating system, but one that is not

currently active, will proceed without reboot. After you click Proceed, Acronis True Image

Echo Workstation will start cloning the old disk to the new disk, indicating the progress in

a special window. You can stop this procedure by clicking Cancel. In that case, you will

have to repartition and format the new disk or repeat the cloning procedure. After the

operation is complete, you will see the results message.

The manual transfer method enables you to resize partitions on the new disk. By default,

the program resizes them proportionally.

In the next window, you will see rectangles indicating the source hard disk, including its

partitions and unallocated space, as well as the new disk layout.

138

Table of Contents

True image echo