Table of Contents
Advertisement
Chapter 9. Managing the Acronis Secure
Zone
The Acronis Secure Zone is a special partition for storing archives on the computer system
3.3 Acronis Secure Zone
itself. For more information see
.
When you click Manage Acronis Secure Zone in the menu, the program searches for
the zone on all local drives. If a zone is found, the wizard will offer to manage it
(consolidate or remove backups, resize or change the password) or delete. If there is no
zone, you'll be prompted to create it.
If the Acronis Secure Zone is password-protected, the proper password must be entered
before any operation can take place.
9.1 Creating Acronis Secure Zone
The Acronis Secure Zone can be located on any internal disk. It is created using
unallocated space, if available, or at the expense of free space on a partition. Partition
resizing may require a reboot.
A computer can have only one Acronis Secure Zone. To create a zone on another disk,
you must first delete an existing zone.
1. Before creating a zone, you may want to estimate its size. To do so, start a backup and
select all data you are going to copy into it. At the Set Backup Options step, choose
Set the options manually, then set the compression level. You will see the estimated
full backup size (for disk/partition backup) or the approximate compression ratio (for file-
level backup) with which you can calculate the estimated full backup size. Multiply this by
about 1.5 to be able to create incremental or differential backups.
2. If there are several disks installed, select one on which to create Acronis Secure Zone.
3. Select the partitions from which space will be used to create the zone.
106
Copyright © Acronis, Inc., 2000-2009
Advertisement
Table of Contents
