Table of Contents
Advertisement
16.1.3 Specific options (options specific for individual trueimagecmd
commands)
Option
create
/harddisk:[disk number]
/partition:[partition
number]
/file_partition:[partition
letter]
/raw
/progress:[on | off]
filebackup
/include:[names]
/exclude_names:[names]
/exclude_masks:[masks]
147
Description
Specifies the hard disks to include into the image file. The list of
available hard disks is provided by the
may contain data of more than one hard disk. In that case,
separate disk numbers by commas, e.g.:
/harddisk:1,3
By specifying
/harddisk:DYN
you will back up all dynamic volumes present in the system.
Specifies the partitions to include into the image file. The list of
available partitions is provided by
specified as <disk number>-<partition number>, e.g.:
/partition:1-1,1-2,3-1
Dynamic volumes are specified with prefix DYN, e.g.:
/partition:DYN1,DYN2
Specifies the partition where the image file will be stored (by letter
or number). This option is used with
that case the file name must be specified without drive letter or root
folder. For example:
/file_partition:D /filename:"\1.tib"
Dynamic volumes are specified with prefix DYN, e.g.:
/file_partition:DYN1 /filename:"\1.tib"
Use this option to create an image of a disk (partition) with an
unrecognized or unsupported file system. This will copy all
disk/partition contents sector-by-sector. Without this option only the
sectors containing useful system and user data are imaged (for the
supported file systems).
Shows/hides the progress information (percent completed). It is
shown by default.
Files and folders to be included in the backup (comma separated).
For example:
/include:E:\Workarea\MyProject
Files and folders to be excluded from the backup (comma
separated). For example:
/exclude_names:E:\Workarea\MyProject\111.doc,E:\W
orkarea\MyProject\Old
Applies masks to select files to be excluded from the backup. Use
the common Windows masking rules. For example, to exclude all
files with extension .exe, add *.exe. My???.exe will exclude all
.exe files with names consisting of five symbols and starting with
command. An image
/list
. Partition numbers are
/list
/filename:[file_name]
Copyright © Acronis, Inc., 2000-2009
. In
Advertisement
Table of Contents
