Security; Executing Transfers; Selecting Clone Mode; Selecting Source Disk - ACRONIS TRUE IMAGE ECHO - WORKSTATION User Manual

Table of Contents

Advertisement

14.2 Security

Please note the following: If the power goes out or you accidentally press RESET during
the transfer, the procedure will be incomplete and you will have to partition and format or
clone the hard disk again.
No data will be lost because the original disk is only being read (no partitions are changed
or resized) until data transfer is completed.
We recommend that you do not delete data from the old disk until you are sure it is
correctly transferred to the new disk, the computer boots up from it and all applications
work.

14.3 Executing transfers

14.3.1 Selecting Clone mode

You will see the Clone mode window just after the welcome window.
We recommend using automatic mode in most cases. The manual mode can be useful if
you need to change the disk partition layout.
If the program finds two disks, one partitioned and another unpartitioned, it will
automatically recognize the source disk as the partitioned disk and the destination disk as
the unpartitioned disk, so the next two steps will be bypassed.

14.3.2 Selecting source disk

If the program finds several partitioned disks, it will ask you which is the source (i.e. the
older data disk).
132
Copyright © Acronis, Inc., 2000-2009

Advertisement

Table of Contents
loading

This manual is also suitable for:

True image echo

Table of Contents