Specifying Mass Storage Drivers; Additional Settings - ACRONIS TRUE IMAGE ECHO - WORKSTATION User Manual

Table of Contents

7.4.6 Specifying mass storage drivers

This option appears only in those computers' options, where Acronis Universal Restore is

installed.

Acronis Universal Restore is an option to Acronis True Image Echo Workstation. It should

be purchased separately and installed from a separate setup file. For more information

3.7 Acronis Universal Restore

see

Here you can specify a path to the driver repository on a network drive or CD where

Acronis Universal Restore will search for drivers at restoring a system disk on dissimilar

hardware. If several paths are specified, the program will scan all locations and choose

the most suitable driver.

1. Set current date and time for the restored files

The preset is enabled.

Choose whether to restore files' date and time from the archive or assign the files the

current date and time.

2. Before data is restored from the archive, Acronis True Image Echo Workstation can

check its integrity. If you suspect that the archive might have been corrupted, select

Validate backup archive before restoration.

To check archive data integrity you must have all incremental and differential backups

belonging to the archive and the initial full backup. If any of successive backups is

missing, validation is not possible.

3. Having restored a disk/partition from an image, Acronis True Image Echo Workstation

can check the integrity of the file system. To do so, select Check file system after

restoration.

Verification of the file system is available only when restoring disk/partitions under

Windows and for FAT16/32 and NTFS file systems.

4. Restore file and folders without full path

Table of Contents

True image echo