Table of Contents
Advertisement
Quick Links
Elongation: 8% at 1,800 lbs.
MANUAL-ROPEVERT
No.
FS700-581200
FS700-58600
FS700-100GA
FS700-25GA
FS700-50GA
FS700-75GA
FS700-100
FS700-100-HH
FS700-100-TT
FS700-150
FS700-150-HH
FS700-200
FS700-200-HH
FS700-25
FS700-250
FS700-25-HH
FS700-25-TT
FS700-30
FS700-300
FS700-30-HH
FS700-30-TT
FS700-350-HH
FS700-400
FS700-50
FS700-50-HH
FS700-50-NB
FS700-60-TT
FS700-75
FS700-75-HH
FS700-100GA-3E
FS700-150GA-3E
FS700-25GA-3E
FS700-50GA-3E
FS700-75GA-3E
This manual is intended to meet the manufacturer's instructions as
required by ANSI Z359.15-2014 and should be used as part
of an employee training program as required by OSHA.
Do not throw away these instructions!
Read and understand these instructions before using equipment!
V1.0 2022 Copyright Safewaze
Vertical Lifeline Instruction
5/8" 100% Polyester Rope / Steel Hardware
Z359.1-2020 Z359.13-2013 Z359.15-2014
Manual
Z359.15*
ONLY IF
USED IN A
FULL
ASSEMBLY 1926.502 1910.66
1910.140
Advertisement
Table of Contents
Related Manuals for SafeWaze FS1118
Summarization of Contents
Introduction and Application
Application
Safewaze VLLs are designed for use as part of a complete personal fall protection system for a single user.
Applicable Safety Standards
Product meets OSHA and ANSI standards when used as instructed.
Worker Classifications
Defines Qualified, Competent, and Authorized persons regarding fall hazards.
Purpose
Vertical Rope Lifelines are used as part of a PFAS, not for Horizontal Lifeline systems.
Specifications
Details anchorage requirements, rope lifeline types, and anchorage connectors.
Product Specifics and Limitations
Product Specific Applications
VLLs for single user PFAS, with limits on fall arrester and lanyard length.
Limitations and Fall Clearance
Explains fall clearance calculation, including stretch, lanyard, and safety factors.
Connector and Rope Grab Usage
Connector Compatibility and Engagement
Ensures connectors work together, meet strength requirements, and avoid unintentional disengagement.
Making Connections
Instructions on proper connection techniques and prohibited configurations.
Rope Grab Operations
Rope Grab Sizing and Type
Details rope grabs, compatible rope types, and required shock absorbers.
Manual Rope Grab Operation
Instructions for using the FS1117 manual rope grab.
Specific Rope Grab Installations
Trailing Rope Grab Installation and Operation
Guide for installing and operating FS1118 and FS1120 trailing rope grabs.
Self-Tracking Rope Grab Installation
Instructions for installing the removable FS1118-DC self-tracking rope grab.
SW-EX8000 Installation and Operation
Steps for installing and operating the SW-EX8000 rope grab.
Component Installation and Safety
Rope Termination Plate Installation
Steps for installing the FS875 rope termination plate for anchorage.
Edge Protector Installation
Guide for installing rope edge protectors to prevent lifeline damage.
Edge Protection Warning
Advises against using equipment near sharp or abrasive surfaces and stresses protection.
Inspection and Maintenance
Inspection
User and Competent Person inspection requirements for rope, hardware, and fall arresters.
Maintenance, Cleaning, & Storage
Guidelines for equipment maintenance, cleaning procedures, and proper storage.
Safety Information and Labeling
Safety Information
Covers equipment alteration, workplace assessment, system selection, and rescue planning.
General Safety Warnings
Crucial warnings regarding unsafe usage, environmental hazards, and combinations of equipment.
Labeling and Identification
Explains labels on products, their meaning, and essential user information.
Need help?
Do you have a question about the FS1118 and is the answer not in the manual?
Questions and answers